Welcome to HFX precision technology co.,ltd.
E-mail: sales@hfl-diecasting.com Tel: 0086-13829265159
content is empty!
Powder coating: |
Base metal can be Aluminum, Zinc, steel and copper; |
Color can be specified by customers; |
Confirm to RoHs |
Brand normally use: Akzo Nobel, the Tiger powder, can be specifed by customers; |
For special application we can use uL qualified powder; |
Anodizing finish for ALuminum: |
Color can be specifed by customer; |
Glossy or matt finish: Matt surface been achieved by sand blasting, acid etched or alkali etched |
Dyeing or electro-colored |
Own the experience on anodizing per the military spec "MIL-A-8625" |
Electroplating: |
Base material: Steel, Aluminum, Zinc, Brass |
Category: |
a. Zinc plating: clear, black or yellow |
Can be per ASTM B633 |
Salt spray test can reach 96~120Hr |
b. Nickel plating: Glossy or satin finish |
Coating layers: Copper + Nickel |
c. Chrome plating: Glossy or satin finish |
Coating layers: Copper+Nickel+Chrome |
Powder coating: |
Base metal can be Aluminum, Zinc, steel and copper; |
Color can be specified by customers; |
Confirm to RoHs |
Brand normally use: Akzo Nobel, the Tiger powder, can be specifed by customers; |
For special application we can use uL qualified powder; |
Anodizing finish for ALuminum: |
Color can be specifed by customer; |
Glossy or matt finish: Matt surface been achieved by sand blasting, acid etched or alkali etched |
Dyeing or electro-colored |
Own the experience on anodizing per the military spec "MIL-A-8625" |
Electroplating: |
Base material: Steel, Aluminum, Zinc, Brass |
Category: |
a. Zinc plating: clear, black or yellow |
Can be per ASTM B633 |
Salt spray test can reach 96~120Hr |
b. Nickel plating: Glossy or satin finish |
Coating layers: Copper + Nickel |
c. Chrome plating: Glossy or satin finish |
Coating layers: Copper+Nickel+Chrome |
Material | Tensile Strength | Yield Strength(0.2%) | Impact Strength | Shear Strength | Hardness | Elongation |
PSI*103 | PSI*103 | FT lb | PSI*103 | Brinell(HB) | % in 50mm | |
ADC12 | 45 | 22 | 3 | —— | 75 | 3.5 |
A380 | 47 | 23 | 3 | 27 | 80 | 3.5 |
A360 | 46 | 24 | —— | 26 | 75 | 3.5 |
B390 | 46 | 36 | —— | —— | 120 | 1 |
ZAMAK 3 | 41 | 32 | 43 | 31 | 82 | 10 |
ZAMAK 5 | 48 | 33 | 48 | 38 | 91 | 7 |
ZA27 | 61 | 55 | 9.4 | 47 | 119 | 3 |
Material | Tensile Strength | Yield Strength(0.2%) | Impact Strength | Shear Strength | Hardness | Elongation |
PSI*103 | PSI*103 | FT lb | PSI*103 | Brinell(HB) | % in 50mm | |
ADC12 | 45 | 22 | 3 | —— | 75 | 3.5 |
A380 | 47 | 23 | 3 | 27 | 80 | 3.5 |
A360 | 46 | 24 | —— | 26 | 75 | 3.5 |
B390 | 46 | 36 | —— | —— | 120 | 1 |
ZAMAK 3 | 41 | 32 | 43 | 31 | 82 | 10 |
ZAMAK 5 | 48 | 33 | 48 | 38 | 91 | 7 |
ZA27 | 61 | 55 | 9.4 | 47 | 119 | 3 |
TEL :
+86-138-2926-5159
FAX :
0086-0769-87017050
EMAIL :
sales@hfl-diecasting.com
WHATSAPP :
+86-138-2926-5159
Copyright © 2021 HFX precision technology co.,ltd. All Rights Reserved.
Support By Leadong.